A timeless representation of faith, devotion, and spiritual guidance. This STL file is recommended for FDM Printers!3D Printing Time : Monocolor - 06 Hours, 51 Minutes* (may vary according to your printer model) Multiparts - 07 Hours, 54 Minutes* (may vary according to your printer model) Multicolor - 22 Hours, 55 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)Approximately Height: 22 cm *Note: Printing time based on a Bambu P1S printer, according to our tests. ATTENTION: “Multipart” files requires super glue. 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)Line Width/ Nozzle: 0.4 mmFirst Layer Line Width: 0.48 mm / 120%Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)Recommended Initial Layer Height: 0.20 mmRecommended Layer Height: 0.20 mm (0.16mm only in “crown” files)Recommended Perimeters/ Walls: 2.Recommended Infill (%): 5% (Gyroid)Needs Support: No.Build Plate Adhesion: No.Others: The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.Happy Printing!